Skip to content

Guide

What a certificate of analysis can and cannot tell you

A certificate of analysis reports tests on one batch. Learn what it shows, what it does not establish, and what to check before you pay.

Updated 7 October 2026

A certificate of analysis, usually shortened to COA, is one of the most common documents you will see attached to peptide products. It is useful, but it is often treated as proof of more than it actually shows. This guide explains what a COA is, what it can tell you, what it cannot, and what to check when you read one.

What a certificate of analysis is

A COA is a report of laboratory tests carried out on a sample from one specific batch of a product. It records:

  • which batch was tested
  • which tests were carried out, and by which methods
  • the results of those tests, often alongside an acceptance limit or specification
  • who carried out the testing, and when
  • who checked and signed off the report

In short, a COA tells you what was tested, how, by whom and with what result, for that batch.

What a COA can tell you

When it is complete and matches your product, a COA can help you understand:

  • Identity testing. Whether the tested sample was analysed to confirm it matches the expected substance, using a named method.
  • Measured composition. Results such as a reported purity figure from the method used. A purity figure belongs to that method and that sample; it is not a general quality guarantee. Our guide to peptide purity explains what a purity figure includes and leaves out.
  • The testing laboratory. Which lab produced the results, so you can see whether the document was issued by an identifiable organisation.
  • Traceability. A batch number that links the report to a specific production run.

What a COA cannot tell you

This is the part that is most often misunderstood. A COA does not establish:

  • Registration or approval. A COA is not a registration certificate, a licence or a regulatory approval of any kind, in Kenya or elsewhere.
  • Clinical safety. Laboratory analysis of a sample is not evidence that a product is safe for any person to use.
  • Efficacy. A COA says nothing about whether a product does anything, or what it does.
  • Sterility, unless a sterility test is specifically listed with its method and result. Even then, it describes the tested sample, not every unit.
  • Suitability for any use. Whether a product is appropriate for a particular person or purpose is a question for a qualified health professional, not a lab report.
  • Handling after testing. A COA reflects the sample at the time it was tested. It does not show how the product has been stored or transported since.
  • Other batches. A COA for one batch tells you nothing about a different batch, even of the same product.

What to check on a COA

When you read a COA, work through these points.

The batch number matches your pack

The batch or lot number on the COA should match the batch number printed on the product you receive. A COA for a different batch, or one with no batch number at all, cannot be linked to your product.

The date

Look for the date of testing or the date the report was issued. Compare it with the product’s labelled manufacture or expiry date, where shown. A date that does not make sense against the pack is worth asking about.

The laboratory is named

The report should name the laboratory that did the testing, ideally with an address or other identifying details. A report with no identifiable issuer tells you very little.

The methods are stated

Each result should be linked to a named test method. Common examples you may see include high-performance liquid chromatography (HPLC) and mass spectrometry (MS). A result with no stated method is hard to interpret.

Results and limits are clear

Results should be stated clearly, with units, and ideally with the limit or specification they were compared against. Look for a clear pass or conformity statement for each test listed.

It is signed off

A COA is normally signed off by a named person at the issuing laboratory or manufacturer. Check there is a signature, and a name or role.

It looks complete and unaltered

Check the document is legible and complete, with no missing pages, cropped sections or obvious edits. If something looks wrong, ask.

Asking us for a batch document

On this site, batch certificates are shared with customers on request. Once you have an order reference, use the Request a batch certificate page and we email you the certificate for the batch in your order, before you pay.

Payment is only requested after we have confirmed your order. When your parcel arrives, check that the batch number on the pack matches the document you were given. Our guide to receiving your delivery covers that step.

Questions a COA cannot answer

If your question is about whether a product is right for you, how it should be used, or what it might do, a COA cannot answer it and neither can we. Please speak to a qualified health professional.

This guide is general information, not medical advice. We don’t give dosing or usage instructions. For questions about a product, speak to our team; for your health, speak to a qualified health professional.

Related products

Your basket